"Mistakes are always forgivable, if one has the courage to admit them."
                -- Bruce Lee

Author Topic: Sword Repair  (Read 9124 times)

Leganoth

  • Forum Follower
  • ***
  • Posts: 343
Sword Repair
« on: 2012-03-04, 03:51:02 »
Any of you guys know where I can send in my bastard sword to get sharpened/cross guard tightened/ polished/and cleaned?
Also to get rid of contact marks

Sir William

  • Cogito ergo sum
  • Knight of the Order
  • Forum Veteran
  • ****
  • Posts: 7,154
Re: Sword Repair
« Reply #1 on: 2012-03-05, 20:09:32 »
Sonny over at Valiant Armoury can set you straight, so long as the blade's salvageable, they can restore it to near-new condition.  Tell'm what you want, he'll quote you a price.

http://www.valiant-armoury.com/contact.php

Good luck, take pics before you send it and after you get it back!
The Black Knight, Order of the Marshal
'Per Pale Azure and Sable, a Chevron counterchanged fimbriated argent.' 
“Pride makes a man, it drives him, it is the shield wall around his reputation.  Men die, but reputation does not.â€

Sir Ulrich

  • Squire of the Order
  • Forum Acolyte
  • ***
  • Posts: 1,177
Re: Sword Repair
« Reply #2 on: 2012-03-06, 00:38:53 »
When it comes to blocking, you're supposed to use the flat end of the sword not the blade end. What kind of sword is it anyway, I know where to get good swords that are "beaters" that you can use for blade on blade contact though the one I use is not exactly Teutonic Knightish this two may fit in.
This one could work http://kultofathena.com/product.asp?item=SH2106 This one as well http://kultofathena.com/product.asp?item=PC2046
I usually go with Hanwei because they're cheap and effective and not overpriced like Albion.

Ian

  • Knight of the Order
  • Forum Veteran
  • ****
  • Posts: 2,994
Re: Sword Repair
« Reply #3 on: 2012-03-06, 00:49:05 »
Sonny over at Valiant Armoury can set you straight, so long as the blade's salvageable, they can restore it to near-new condition.  Tell'm what you want, he'll quote you a price.

http://www.valiant-armoury.com/contact.php

Good luck, take pics before you send it and after you get it back!

+1
My YouTube Channel - Knyght Errant
My Pinterest

Qui desiderat pacem, praeparet bellum

Leganoth

  • Forum Follower
  • ***
  • Posts: 343
Re: Sword Repair
« Reply #4 on: 2012-03-06, 03:54:08 »
When it comes to blocking, you're supposed to use the flat end of the sword not the blade end. What kind of sword is it anyway, I know where to get good swords that are "beaters" that you can use for blade on blade contact though the one I use is not exactly Teutonic Knightish this two may fit in.
This one could work http://kultofathena.com/product.asp?item=SH2106 This one as well http://kultofathena.com/product.asp?item=PC2046
I usually go with Hanwei because they're cheap and effective and not overpriced like Albion.
ive got a double edged bastard sword, hanwei

Sir Brian

  • Knight of the Order
  • Forum Veteran
  • ****
  • Posts: 4,735
  • Felix uxor beatam vitam - Happy Wife Happy Life
    • Order of the Marshal
Re: Sword Repair
« Reply #5 on: 2012-03-06, 08:53:47 »
When it comes to blocking, you're supposed to use the flat end of the sword not the blade end.

This is an absolute truth however edge on edge contact will inevitably occur in which case having and applying a good file is a must.  ;)

I usually go with Hanwei because they're cheap and effective and not overpriced like Albion.
Then again you do get what you pay for. Albions and A&A blades are the top of the line blades for good reason, they are truly that well made. I have both an Albion Meyer and a Hanwei Tinker Pearce. The Hanwei was my first blade and has served and continues to serve me very well, although it does require a lot more maintenance. I luckily picked it up while on sale for $150.00 with shipping which it now goes for nearly twice that and that to me is a little overpriced. :-\

The Albion however handles like a dream. Suffice to say that the difference between the two is sort of like taking a long road trip and choosing between either driving a fully loaded Luxury car or a subcompact economy car. Both will get you to your destination but the luxury car will get you there in style and comfort with the added assurance of keeping you far safer in any potential mishaps.  ;)
"Chivalry our Strength, Brotherhood our sword"
Vert, on a Chief wavy Argent a Rose Sable,
a Gryphon Segreant Or

[img width=100 height=100]
<a href="http://s221.photobucket.com/user/Tah908/media/LP_Medals_zpsq7zzdvve.jpg.html" target="_blank"><img src="http://i221.photobucket.

Sir William

  • Cogito ergo sum
  • Knight of the Order
  • Forum Veteran
  • ****
  • Posts: 7,154
Re: Sword Repair
« Reply #6 on: 2012-03-06, 20:49:40 »
When it comes to blocking, you're supposed to use the flat end of the sword not the blade end. What kind of sword is it anyway, I know where to get good swords that are "beaters" that you can use for blade on blade contact though the one I use is not exactly Teutonic Knightish this two may fit in.
This one could work http://kultofathena.com/product.asp?item=SH2106 This one as well http://kultofathena.com/product.asp?item=PC2046
I usually go with Hanwei because they're cheap and effective and not overpriced like Albion.


As Sir Brian mentioned, edge to edge contact is going to happen in a sword duel; with that said, your tool of choice does make (or break) the overall experience.  The H/T swords are better than the original Hanwei offerings...head and shoulders above better, in fact.  However, with the obvious exception of overall silhouette, measurements, weight and perhaps balance, the differences between say H/T and an Albion are going to be obvious the more exposure you have to the upper echelon of the production sword market.  People generally don't buy Albions because their performance is so much better than the competitions, they buy Albions because the attention to detail they pay with each piece they've researched results in a sword that would've been at home in-period, and will handle and perform as their historical counterparts did.  They are not the strongest, or most robust swords- you could choose DSA or Gen II (for the beater crowd) if you wanted a sword that was more like a tank.

My first Albion was the Arn sword.  Until then, most of what I'd handled was Windlass/MRL, H/T and Valiant Armoury's collabo w/Angus Trim (another great crop of production swords that are affordable and well built, and offer scabbard and suspension rigs custom made to order, thereby sweetening the deal), and the odd Deepeeka piece.  I thought I had a pretty good grasp on swords, how they're supposed to handle, look, feel, perform, etc. 

I remember it like it was yesterday; suffering from H1N1 during a lull in a particularly hellacious bout of snow and my wife tells me about this white box that showed up on the doorstep.  It sat in my warchambers for a couple days before I decided to see what it was.  I wasn't expecting it, as I'd been told it'd be about 3-6 weeks for it to arrive.  The first time I held it in my hand, I knew I'd come across something that was 'extra' to anything I'd seen thus far.

When we see eachother this year, I'll let you see what one is like; I have two now.  'Deus Irae' is the sword I normally carry (as a Templar or Crusader)...I've lucked up on a Squire Line Knight; a bit rougher in aspect to the Signature Line version, it still has all of the ability and the sweet handling characteristics of its higher end brother, but w/a rougher finish.  It is a most capable cutter and handles like a dream- even moreso than Irae, which has a further out point of balance- it is more of a battle sword and probably shows its true colors when wielded from horseback.  :)

Still...to hold one is to fall in love...
The Black Knight, Order of the Marshal
'Per Pale Azure and Sable, a Chevron counterchanged fimbriated argent.' 
“Pride makes a man, it drives him, it is the shield wall around his reputation.  Men die, but reputation does not.â€

Sir Edward

  • Forum Admin
  • Commander of the Order
  • Forum Veteran
  • *****
  • Posts: 9,340
  • Verum et Honorem.
    • ed.toton.org
Re: Sword Repair
« Reply #7 on: 2012-03-06, 20:59:31 »

Yep, there are cases where edge-to-edge happens, even if it's just to make sure you catch the blade in such a way that your crossguard stops it before it gets to your hand. :)

There have been many long drawn out arguments about edge vs flat parries on various other forums. Suffice it to say, neither one is an absolute. :)
Sir Ed T. Toton III
Knight Commander, Order of the Marshal

( Personal Site | My Facebook )

Thorsteinn

  • Squire of the Order
  • Forum Veteran
  • ***
  • Posts: 2,470
Re: Sword Repair
« Reply #8 on: 2012-03-20, 02:58:43 »
There have been many long drawn out arguments about edge vs flat parries on various other forums. Suffice it to say, neither one is an absolute. :)

I heard this argument go on once in a defunct HEMA group. I got tired of everybody arguing and looked at the group leader and said "If the sword doesn't hit you then you've done it right".

Besides, flat or edge? Pah! Blocking is what a Shield is for!  ;D

"Shields: We take the hit, so you don't have to!"
« Last Edit: 2012-03-20, 03:00:38 by RauttSkegg »
Fall down seven, get up eight.

Sir James A

  • Weapons & Armor addict
  • Knight of the Order
  • Forum Veteran
  • ****
  • Posts: 6,043
Re: Sword Repair
« Reply #9 on: 2012-03-20, 12:37:38 »
Or avoiding hits for the MMORPGers:

Knight, Order of the Marshal
Sable, a chevron between three lions statant Argent

Sir Edward

  • Forum Admin
  • Commander of the Order
  • Forum Veteran
  • *****
  • Posts: 9,340
  • Verum et Honorem.
    • ed.toton.org
Re: Sword Repair
« Reply #10 on: 2012-03-20, 13:10:02 »

LOL yeah. :) Tanks... taking the hits so you don't have to. :)

I was always more of a DPSer myself though. :)
Sir Ed T. Toton III
Knight Commander, Order of the Marshal

( Personal Site | My Facebook )