"He who conquers others is strong; he who conquers himself is mighty."
                -- Lau Tzu

Author Topic: Multi-purpose cutting stands  (Read 10879 times)

Sir James A

  • Weapons & Armor addict
  • Knight of the Order
  • Forum Veteran
  • ****
  • Posts: 6,043
Multi-purpose cutting stands
« on: 2014-09-20, 22:00:30 »
Some quick photos of a new style cutting stand I made. Had some materials on hand that have been sitting around, and decided I'd make myself a stand. Made a couple extra, because, well why not?

All 3 are the same. The "lower" part of the stand has a hole in it that can use: (1) a spiked peg for tatami / pool noodles, (2) a flat platform to place milk jugs, water bottles, evil cabbages, etc., or (3) an add-on piece to raise the height of the stand, which also has a hole in top and can use the spiked peg or platform as well.

Basic measurements:
  • 35" tall overall
  • main post: 27" base + 8" elevation add-on, 4x4 post (3 1/2" x 3 1/2")
  • roughly 10" long feet, 2x4 lumber (1 1/2" x 3 1/2")
  • 1" holes for spikes / platform

Assembly:
  • Two screws per leg.
  • Each leg butts against the other for stability.
  • Drill holes for pegs (3)
  • Cut little platform (6"x6" is what size I did)
  • Cut small peg that goes on the bottom of platform and screw together

Photos:


Overview. I turned the extension piece on the one in the middle so it's easy to see where it joins.


Close-up of the stands.


Overhead view of the peg and the rotated add-on piece.


The add-on piece showing the peg and hole for the peg.


The little platform and the bottom peg piece. This one is a little shorter, I made the other few slightly longer since I had enough leftover dowel rod.

Now for the fun part.... place spike / platform, put stuff on it, get swords, and cut things!! :D
Knight, Order of the Marshal
Sable, a chevron between three lions statant Argent

Sir Nate

  • Nathan
  • Yeoman of the Order
  • Forum Acolyte
  • **
  • Posts: 1,702
Re: Multi-purpose cutting stands
« Reply #1 on: 2014-09-21, 22:30:39 »
Awesome!
Nathan Phillip Max
Knight of the Order
"Though I walk through the valley of the shadow of death, I shall fear no evil"

Sir Edward

  • Forum Admin
  • Commander of the Order
  • Forum Veteran
  • *****
  • Posts: 9,340
  • Verum et Honorem.
    • ed.toton.org
Re: Multi-purpose cutting stands
« Reply #2 on: 2014-09-22, 20:01:37 »

Awesome! Those will be great.

The one I have, is really only meant for the foam targets. It uses a peg, on top of a steel pipe.
Sir Ed T. Toton III
Knight Commander, Order of the Marshal

( Personal Site | My Facebook )

Sir Nate

  • Nathan
  • Yeoman of the Order
  • Forum Acolyte
  • **
  • Posts: 1,702
Re: Multi-purpose cutting stands
« Reply #3 on: 2014-09-22, 22:27:07 »
I get whatever I can find in the yard. And try to do stuff with that.
Nathan Phillip Max
Knight of the Order
"Though I walk through the valley of the shadow of death, I shall fear no evil"

Sir William

  • Cogito ergo sum
  • Knight of the Order
  • Forum Veteran
  • ****
  • Posts: 7,154
Re: Multi-purpose cutting stands
« Reply #4 on: 2014-09-23, 19:56:49 »
Nice job, Sir James - I like them/it.
The Black Knight, Order of the Marshal
'Per Pale Azure and Sable, a Chevron counterchanged fimbriated argent.' 
“Pride makes a man, it drives him, it is the shield wall around his reputation.  Men die, but reputation does not.â€

Sir Wolf

  • He Who is Not to be Named
  • Knight of the Order
  • Forum Veteran
  • ****
  • Posts: 5,389
  • i have too many hats
    • man e faces
Re: Multi-purpose cutting stands
« Reply #5 on: 2014-09-23, 20:44:52 »
how much for the blackened thumb?