"The elevator to success is out of order. You'll have to use the stairs... one step at a time."
                -- Joe Girard

Author Topic: Wedge riveting tool?  (Read 4444 times)

Sir Ulrich

  • Squire of the Order
  • Forum Acolyte
  • ***
  • Posts: 1,177
Wedge riveting tool?
« on: 2012-12-24, 02:02:08 »
Does anyone know where I can get a tool for wedge riveting rings for maille? I have found a source of brass rings and need a tool to rivet them to upgrade my soon to get hauberk so it matches my new coif.

Thorsteinn

  • Squire of the Order
  • Forum Veteran
  • ***
  • Posts: 2,470
Re: Wedge riveting tool?
« Reply #1 on: 2012-12-24, 02:54:15 »
Wedge or Round rivets?
Fall down seven, get up eight.

Sir Ulrich

  • Squire of the Order
  • Forum Acolyte
  • ***
  • Posts: 1,177
Re: Wedge riveting tool?
« Reply #2 on: 2012-12-24, 03:40:06 »
Wedge rivets. I have grown a strong hatred for maille with dome rivets thats made in india.... So i'm switching all my maille slowly.

Thorsteinn

  • Squire of the Order
  • Forum Veteran
  • ***
  • Posts: 2,470
Re: Wedge riveting tool?
« Reply #3 on: 2012-12-24, 03:57:24 »
Fall down seven, get up eight.

Sir James A

  • Weapons & Armor addict
  • Knight of the Order
  • Forum Veteran
  • ****
  • Posts: 6,043
Re: Wedge riveting tool?
« Reply #4 on: 2012-12-24, 15:19:27 »
IceFalcon, Lone Wolf Chain Mail

Historic Enterprises used to have them, I don't see them on the site at quick glance but might still get them if you ask

Edit: I believe GDFB makes a set too. Wherever you buy the mail, generally, buy the pliers from the same supplier. For pin rivets, my historic enterprises pliers don't work with the icefalcon pin riveted mail, I had to get his; slightly different dome size, and they're so small it's critical
« Last Edit: 2012-12-24, 15:20:17 by James Anderson III »
Knight, Order of the Marshal
Sable, a chevron between three lions statant Argent