"We don't receive wisdom; we must discover it for ourselves after a journey (Quest?) that no one can take for us or spare us."
                -- Marcel Post (1871 - 1922)
« previous next »
Pages: 1 ... 3 4 [5] 6 7 ... 9   Go Down

Author Topic: Rust, preventing and cleaning  (Read 141823 times)

Sir Douglas

  • Artificer of Stuff and Things
  • Knight of the Order
  • Forum Acolyte
  • ****
  • Posts: 815
  • In principio creavit Deus caelum et terram.
Re: Rust, preventing and cleaning
« Reply #60 on: 2013-12-10, 20:03:15 »
I started out using a paste wax; Trewax or something like that. It worked great, but it would get gummed up in breathes and between the joins in the plates, and it was red so there would be these little bits of red wax stuck in places that were hard to clean. Then I tried beeswax, but it was just too hard to work with and, being lazy, I wasn't going to bother with heating it up to make it softer.

The Eagle One is really nice, though. Just spray it on and rub it in with a soft cloth. It doesn't seem to dull the shine as much as the paste wax. I'm guessing because it's specifically formulated for automobiles. The only thing is I haven't been using it for very long, so for the time being I'm unsure if there are any negative long-term effects. So far so good, though.
Logged
Per pale azure and argent, an eagle displayed per pale argent and sable, armed and langued or.

So a Norman, a Saxon, and a Viking walk into England....

LionPride32

  • New Forum Member
  • *
  • Posts: 49
  • New Member
Re: Rust, preventing and cleaning
« Reply #61 on: 2013-12-15, 12:12:08 »
Hehehe I know ALL about CLP!! I was THE armorer of my unit in the marines!! The only one in the unit who could get away with telling the C.O. what  to do.!!! "Sorry Sir, your rifle isn't clean enough....please go out back and scrub it some more."
Logged

Ian

  • Knight of the Order
  • Forum Veteran
  • ****
  • Posts: 2,994
Re: Rust, preventing and cleaning
« Reply #62 on: 2013-12-15, 13:22:22 »
Yeah, knowing you were a marine I didn't bother explaining anything about CLP because I had a sneaking suspicion you may have used it once or twice before...  ;)

Bottom line, it works great on swords and armor too.
Logged
My YouTube Channel - Knyght Errant
My Pinterest

Qui desiderat pacem, praeparet bellum

Sir Humphrey

  • Yeoman of the Order
  • Forum Follower
  • **
  • Posts: 123
  • New Member
    • My Author's Website
Re: Rust, preventing and cleaning
« Reply #63 on: 2014-01-02, 18:30:43 »
I was in the Army when CLP was introduced.  We called it "Breakfree" back in the day. It was a God-send.  It replaced both bore cleaner and gun oil and shortened weapon cleaning time tremendously.  I'm new to armor and swords, but knew immediately that CLP would be what I'll be using.
Logged
My second novel, "The Archer's Son," available now on Amazon Kindle.  Find it at  http://amzn.to/Usavxf

 
See my history and archeology blog at: http://erasgone.blogspot.com/

Ian

  • Knight of the Order
  • Forum Veteran
  • ****
  • Posts: 2,994
Re: Rust, preventing and cleaning
« Reply #64 on: 2014-01-02, 18:38:56 »
Quote from: Sir Humphrey on 2014-01-02, 18:30:43
I was in the Army when CLP was introduced.  We called it "Breakfree" back in the day. It was a God-send.  It replaced both bore cleaner and gun oil and shortened weapon cleaning time tremendously.  I'm new to armor and swords, but knew immediately that CLP would be what I'll be using.

Breakfree is the company that produced CLP  until it was bought out by Safariland.
Logged
My YouTube Channel - Knyght Errant
My Pinterest

Qui desiderat pacem, praeparet bellum

Sir James A

  • Weapons & Armor addict
  • Knight of the Order
  • Forum Veteran
  • ****
  • Posts: 6,043
Re: Rust, preventing and cleaning
« Reply #65 on: 2014-01-02, 19:05:12 »
Quote from: Ian on 2014-01-02, 18:38:56
Quote from: Sir Humphrey on 2014-01-02, 18:30:43
I was in the Army when CLP was introduced.  We called it "Breakfree" back in the day. It was a God-send.  It replaced both bore cleaner and gun oil and shortened weapon cleaning time tremendously.  I'm new to armor and swords, but knew immediately that CLP would be what I'll be using.

Breakfree is the company that produced CLP  until it was bought out by Safariland.

Beat me to it :)
Logged
Knight, Order of the Marshal
Sable, a chevron between three lions statant Argent

Sir Martyn

  • Knight Itinerant
  • Knight of the Order
  • Forum Follower
  • ****
  • Posts: 416
  • Courage Honor Faith Humility Justice Prowess Mercy
Re: Rust, preventing and cleaning
« Reply #66 on: 2014-01-18, 04:01:59 »
Oh this is excellent - I have to get some CLP and Eagle One tomorrow - can I get both at Wal-Mart or would a gun shop be a better bet?

I used paste wax after RenFaire on my plate harness and it seems to be holding up fine, but I'm concerned about the inside surfaces as well where the protective paint on the unpolished surfaces has scatted/worn off.  And then there are the swords....
Logged
Among the greatest evils we face are those which lie within.

Don Jorge

  • Learning is living...
  • Yeoman of the Order
  • Forum Follower
  • **
  • Posts: 480
  • He who fears death is already dead...
Re: Rust, preventing and cleaning
« Reply #67 on: 2014-03-06, 19:36:46 »
Which CLP type do you use? I found all types CLP - 4 and CLP - 5? It seems like it comes in different forms...does it matter? Which produces the least mess...also is CLP okay for indoor use or should I take my armor out to the balcony?
Logged

Sir James A

  • Weapons & Armor addict
  • Knight of the Order
  • Forum Veteran
  • ****
  • Posts: 6,043
Re: Rust, preventing and cleaning
« Reply #68 on: 2014-03-06, 21:31:50 »
Quote from: Gareyth on 2014-01-18, 04:01:59
Oh this is excellent - I have to get some CLP and Eagle One tomorrow - can I get both at Wal-Mart or would a gun shop be a better bet?

I used paste wax after RenFaire on my plate harness and it seems to be holding up fine, but I'm concerned about the inside surfaces as well where the protective paint on the unpolished surfaces has scatted/worn off.  And then there are the swords....

Sorry, missed this one before. CLP I have only found at gun store. RemOil can be found at Walmart in the gun section, and I've used it a year or two now without trouble.

I used spray-on truck bed liner on my inner surfaces. When it wears off, clean the rust and respray it. I'd say no more than a year or two - the surfaces getting worn off are being rubbed off, and as long as that continues, it will rub itself clean with usage. Maybe paint it at the end of the season if it's bad enough.

Quote from: Don Jorge on 2014-03-06, 19:36:46
Which CLP type do you use? I found all types CLP - 4 and CLP - 5? It seems like it comes in different forms...does it matter? Which produces the least mess...also is CLP okay for indoor use or should I take my armor out to the balcony?

Breakfree CLP, it's owned by a new company (Safari). I've seen a number of different numbers tagged after the CLP part but never seen any functional difference between them, always just referred to as CLP. Spray is the only form I've ever seen.

It smells, so, I'd do it outside, unless you like the smell, in which case, use it indoors .... then toss out your deodorant and just give yourself a nice little oil coating - sweat will just slide right off!
Logged
Knight, Order of the Marshal
Sable, a chevron between three lions statant Argent

Don Jorge

  • Learning is living...
  • Yeoman of the Order
  • Forum Follower
  • **
  • Posts: 480
  • He who fears death is already dead...
Re: Rust, preventing and cleaning
« Reply #69 on: 2014-03-06, 21:44:39 »
So aerosol is fine? I have seen liquid and aerosol...

Sent from my XT1080 using Tapatalk

Logged

Sir James A

  • Weapons & Armor addict
  • Knight of the Order
  • Forum Veteran
  • ****
  • Posts: 6,043
Re: Rust, preventing and cleaning
« Reply #70 on: 2014-03-06, 23:17:50 »
Quote from: Don Jorge on 2014-03-06, 21:44:39
So aerosol is fine? I have seen liquid and aerosol...

Sent from my XT1080 using Tapatalk



Spray can is what I use for both CLP and RemOil - no problems. Oil is oil, just a question of how messy do you want to be applying it. :)
Logged
Knight, Order of the Marshal
Sable, a chevron between three lions statant Argent

Don Jorge

  • Learning is living...
  • Yeoman of the Order
  • Forum Follower
  • **
  • Posts: 480
  • He who fears death is already dead...
Re: Rust, preventing and cleaning
« Reply #71 on: 2014-03-06, 23:34:22 »
So, I just remembered I had some Skanunu bearing cleaner/lube at home from my longboarding days...this stuff was amazing a lubricating my bearings and making sure they didnt rust when skating in the rain...I wonder how it would hold up as oil for armor...

Check it out:
http://skanunu.com/index.asp

I have this type:
http://shop.skanunu.com/Skanunu-2oz-Bearing-Cleaner-Lube-SKA-BCL-2OZ.htm

Logged

Sir Nate

  • Nathan
  • Yeoman of the Order
  • Forum Acolyte
  • **
  • Posts: 1,702
Re: Rust, preventing and cleaning
« Reply #72 on: 2014-03-13, 03:09:28 »
Ok ive been able to get alot of black corrosion out of my sword, but there still some stuff that looks like a sort of very thin dirt. Ill try and get pics but my camera has trouble picking up the corrosion.
Logged
Nathan Phillip Max
Knight of the Order
"Though I walk through the valley of the shadow of death, I shall fear no evil"

Mike W.

  • Squire of the Order
  • Forum Acolyte
  • ***
  • Posts: 541
Re: Rust, preventing and cleaning
« Reply #73 on: 2014-03-13, 03:11:06 »
it's most likely rust pitting, in which case it's rather permanent unless you grind it.
Logged
D’azur à trois fasces d’argent, et au chef gueule chargé de trois étoiles d’or.

"The first duty of a man is the seeking after and the investigation of truth." - Marcus Tullius Cicero

Sir Nate

  • Nathan
  • Yeoman of the Order
  • Forum Acolyte
  • **
  • Posts: 1,702
Re: Rust, preventing and cleaning
« Reply #74 on: 2014-03-13, 03:18:32 »
Quote from: Baron de Magnan on 2014-03-13, 03:11:06
it's most likely rust pitting, in which case it's rather permanent unless you grind it.

I think you may be right. I will just have to keep a watchful eye and take good care. Oil, or coat of polish. Just something to protect the steel.
Logged
Nathan Phillip Max
Knight of the Order
"Though I walk through the valley of the shadow of death, I shall fear no evil"
Pages: 1 ... 3 4 [5] 6 7 ... 9   Go Up
« previous next »