"No person was ever honored for what he received. Honor has been the reward for what he gave."
                -- Calvin Coolidge
« previous next »
Pages: 1 [2]   Go Down

Author Topic: My project this month (Warning bad drawing here)  (Read 12982 times)

Leganoth

  • Forum Follower
  • ***
  • Posts: 343
Re: My project this month (Warning bad drawing here)
« Reply #15 on: 2011-09-07, 01:56:50 »
Quote from: The Red Knight on 2011-09-06, 04:35:08
I've only seen them in round.  They come in various strengths.  I got mine at Hobby Lobby.  I used four 1/2 inch #10 strength ones to secure my griffen crest.  I drilled some 1/2 inch holes into the underside of the crest, packed in a little plumbers epoxy putty, and then shoved the magnets in the holes.  Haven't had any trouble with them pulling off the crest.  For wings, I'd try two 1/4 inch magnets per side (since the helm is curved).  As for stability, with #10 rare earth magnets, I practically have to pry my crest off!

So this would be good? http://www.kjmagnetics.com/proddetail.asp?prod=DX04
Logged

Sir Rodney

  • Knight of the Order
  • Forum Acolyte
  • ****
  • Posts: 1,118
  • Inquit Corvus
    • The Mercenary Company Nevermore
Re: My project this month (Warning bad drawing here)
« Reply #16 on: 2011-09-07, 12:33:38 »
Quote
Each of these discs has a pull force of over 25 lbs.

Holy magnetic force Batman!
Logged
"Oh, what sad times are these when passing ruffians can say Ni at will to old ladies. There is a pestilence upon this land, nothing is sacred. Even those who arrange and design shrubberies are under considerable economic stress in this period in history." - Roger the Shrubber

Sir Patrick

  • Knight of the Order
  • Forum Acolyte
  • ****
  • Posts: 1,647
  • Nex pro inhonesto, Deus pro totus.
    • The Order of the Marshal
Re: My project this month (Warning bad drawing here)
« Reply #17 on: 2011-09-08, 17:52:09 »
Logged
Gules, a chevron argent between three cinquefoils ermine.
"Better to live one day as a lion, than a thousand as a lamb."
Knight, Order of the Marshal

Leganoth

  • Forum Follower
  • ***
  • Posts: 343
Re: My project this month (Warning bad drawing here)
« Reply #18 on: 2011-09-08, 22:14:34 »
Logged

Sir Patrick

  • Knight of the Order
  • Forum Acolyte
  • ****
  • Posts: 1,647
  • Nex pro inhonesto, Deus pro totus.
    • The Order of the Marshal
Re: My project this month (Warning bad drawing here)
« Reply #19 on: 2011-09-10, 22:50:45 »
Very strong.  I literally have to pry my crest off the helm.
Logged
Gules, a chevron argent between three cinquefoils ermine.
"Better to live one day as a lion, than a thousand as a lamb."
Knight, Order of the Marshal

Sir Brian

  • Knight of the Order
  • Forum Veteran
  • ****
  • Posts: 4,735
  • Felix uxor beatam vitam - Happy Wife Happy Life
    • Order of the Marshal
Re: My project this month (Warning bad drawing here)
« Reply #20 on: 2011-09-12, 08:00:06 »
At the risk of seeming too obtuse, the helm you intend to use the magnets on isn't stainless steel right?  ???
Logged
"Chivalry our Strength, Brotherhood our sword"
Vert, on a Chief wavy Argent a Rose Sable,
a Gryphon Segreant Or
[img width=100 height=100]
<a href="http://s221.photobucket.com/user/Tah908/media/LP_Medals_zpsq7zzdvve.jpg.html" target="_blank"><img src="http://i221.photobucket.

Sir William

  • Cogito ergo sum
  • Knight of the Order
  • Forum Veteran
  • ****
  • Posts: 7,154
Re: My project this month (Warning bad drawing here)
« Reply #21 on: 2011-09-12, 15:29:00 »
That is an excellent question...and a valid one at that.  No matter how strong the magnet, if the helm is stainless you won't get any sticking going on.
Logged
The Black Knight, Order of the Marshal
'Per Pale Azure and Sable, a Chevron counterchanged fimbriated argent.' 
“Pride makes a man, it drives him, it is the shield wall around his reputation.  Men die, but reputation does not.â€

Sir James A

  • Weapons & Armor addict
  • Knight of the Order
  • Forum Veteran
  • ****
  • Posts: 6,043
Re: My project this month (Warning bad drawing here)
« Reply #22 on: 2011-09-12, 22:53:03 »
Quote from: Sir William on 2011-09-12, 15:29:00
That is an excellent question...and a valid one at that.  No matter how strong the magnet, if the helm is stainless you won't get any sticking going on.

A second magnet glued inside the helmet *might* take care of that; seems like the magnetic force that strong could work through steel, but I'm sure at a cost to it's potency. Great point, Sir Brian.
Logged
Knight, Order of the Marshal
Sable, a chevron between three lions statant Argent

Sir Brian

  • Knight of the Order
  • Forum Veteran
  • ****
  • Posts: 4,735
  • Felix uxor beatam vitam - Happy Wife Happy Life
    • Order of the Marshal
Re: My project this month (Warning bad drawing here)
« Reply #23 on: 2011-09-13, 00:20:05 »
Quote from: James Anderson III on 2011-09-12, 22:53:03
Quote from: Sir William on 2011-09-12, 15:29:00
That is an excellent question...and a valid one at that.  No matter how strong the magnet, if the helm is stainless you won't get any sticking going on.

A second magnet glued inside the helmet *might* take care of that; seems like the magnetic force that strong could work through steel, but I'm sure at a cost to it's potency. Great point, Sir Brian.
That could work, but the adhesive holding the inner magnet would become the weakest point but worth trying. :)
« Last Edit: 2011-09-13, 16:10:57 by Sir Brian »
Logged
"Chivalry our Strength, Brotherhood our sword"
Vert, on a Chief wavy Argent a Rose Sable,
a Gryphon Segreant Or
[img width=100 height=100]
<a href="http://s221.photobucket.com/user/Tah908/media/LP_Medals_zpsq7zzdvve.jpg.html" target="_blank"><img src="http://i221.photobucket.

Leganoth

  • Forum Follower
  • ***
  • Posts: 343
Re: My project this month (Warning bad drawing here)
« Reply #24 on: 2011-09-13, 00:31:58 »
Quote from: Sir William on 2011-09-12, 15:29:00
That is an excellent question...and a valid one at that.  No matter how strong the magnet, if the helm is stainless you won't get any sticking going on.

My helm is carbon steel with a brass cross
Logged

Sir William

  • Cogito ergo sum
  • Knight of the Order
  • Forum Veteran
  • ****
  • Posts: 7,154
Re: My project this month (Warning bad drawing here)
« Reply #25 on: 2011-09-13, 19:04:23 »
Problem solved!  lol
Logged
The Black Knight, Order of the Marshal
'Per Pale Azure and Sable, a Chevron counterchanged fimbriated argent.' 
“Pride makes a man, it drives him, it is the shield wall around his reputation.  Men die, but reputation does not.â€
Pages: 1 [2]   Go Up
« previous next »