Miscellaneous > The Sallyport

computer issues server.

(1/2) > >>

Sir Wolf:
came into my office with no internet and non of the computers being able to hit each other in the warehouse. i reset the router(in the house) and nothing. connected the bridge to the router and resite surveyed it, put it back in the warehouse and it can not see the router. i reinstalled the network extender. now the bridge can see it and inter net passes thru it (at the house) but not thru it in the warehouse.

my server can not see my other 3 computers in the warehouse nor they it cause it says something about the network is not there etc or something.

help?

Sir William:
I have a home network I set up but that's pretty rudimentary and largely driven by the router.  How old's your router?  Last time I had a network failure, I upgraded the router (was using an old model just to get it up and running and it ran fine so I left it in place) and presto, had connection.

Sir Wolf:
3 or 4 years maybe. think is i am in the hosue and running 2 computers off of that router. it just doesnt seem to talk out to the warehouse like it did yesterday

Sir James A:

--- Quote from: Sir Wolf on 2013-01-15, 20:34:40 ---3 or 4 years maybe. think is i am in the hosue and running 2 computers off of that router. it just doesnt seem to talk out to the warehouse like it did yesterday

--- End quote ---

I'd really try to run a hardwire if you can. Doesn't take too much to do, and you can get a really long wire and just put ends on it yourself. Should be much more reliable, and faster, than the wireless. Didn't help for today, but to help reduce potential future issues...

Sir Edward:

Yeah, we were talking about this a bit. It started to sound like two issues, since the wireless bridge isn't passing traffic, and the server doesn't see the local network.

Running a wire will be ideal, but it's a longish distance. Ethernet can go something like 300 feet, and it's probably close to that. Anecdotally I hear you can go slightly past that distance. Of course there's always the possibility of using a cheap switch as a repeater, somewhere in between.

To just get things running again, it might take a new bridge, but that might not get the server happy again.

Navigation

[0] Message Index

[#] Next page